收藏本站
AT86RF231
9.7
9.7.1
9.7.2
9.7.3
9.7.4
Frequency Synthesizer (PLL)
The main PLL features are:
? Generate RX/TX frequencies for all IEEE 802.15.4 - 2.4 GHz channels
? Autonomous calibration loops for stable operation within the operating range
? Two PLL-interrupts for status indication
? Fast PLL settling to support frequency hopping
Overview
The PLL generates the RF frequencies for the AT86RF231. During receive operation the fre-
quency synthesizer works as a local oscillator on the radio transceiver receive frequency, during
transmit operation the voltage-controlled oscillator (VCO) is directly modulated to generate the
RF transmit signal. The frequency synthesizer is implemented as a fractional-N PLL.
Two calibration loops ensure correct PLL functionality within the specified operating limits.
RF Channel Selection
The PLL is designed to support 16 channels in the 2.4 GHz ISM band with a channel spacing of
5 MHz according to IEEE 802.15.4. The center frequency of these channels is defined as
follows:
F c = 2405 + 5 (k - 11) in [MHz], for k = 11, 12,..., 26
where k is the channel number.
The channel k is selected by register bits CHANNEL (register 0x08, PHY_CC_CA).
Frequency Agility
When the PLL is enabled during state transition from TRX_OFF to PLL_ON, the settling time is
typically t TR4 = 110 μs, including settling of the analog voltage regulator (AVREG) and PLL self
calibration, refer to Table 7-2 on page 43 and Figure 13-13 on page 168 . A lock of the PLL is
indicated with an interrupt IRQ_0 (PLL_LOCK).
Switching between 2.4 GHz ISM band channels in PLL_ON or RX_ON states is typically done
within t TR20 = 11 μs. This makes the radio transceiver highly suitable for frequency hopping
applications.
When starting the transmit procedure the PLL frequency is changed to the transmit frequency
within a period of t TR23 = 16 μs before starting the transmission. After the transmission the PLL
settles back to the receive frequency within a period of t TR24 = 32 μs. This frequency step does
not generate an interrupt IRQ_0 (PLL_LOCK) or IRQ_1 (PLL_UNLOCK) within these periods.
Calibration Loops
Due to variation of temperature, supply voltage and part-to-part variations of the radio trans-
ceiver the VCO characteristics may vary.
To ensure a stable operation, two automated control loops are implemented, center frequency
(CF) tuning and delay cell (DCU) calibration. Both calibration loops are initiated automatically
when the PLL is enabled during state transition from TRX_OFF to PLL_ON state. Additionally,
center frequency calibration is initiated when the PLL changes to a different channel center
frequency.
121
8111C–MCU Wireless–09/09
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
AT86RF232-ZX 2.4 GHZ ZIGBEE TRANSCEIVER
AT88CK201BK BRD CRYPTORF READER AT88RF1354
AT88SC-ADK2 KIT ARIS+ DK CRYPTOMEM/COMPANION
AT88SC3216CRF-MY1 IC EEPROM 32KBIT 13MHZ TAG
ATA-2001 LVDT AMPLIFIER
ATAB5429-9-B BOARD BASESTATN UHF RCVR 915MHZ
ATAB5749-3 BOARD XMITTER FOR 315MHZ ATA5749
ATAKSTK511-3 KIT RF MODULE 315MHZ FOR STK500
相关代理商/技术参数
AT86RF231-ZU 功能描述:射频收发器 2.4GHz Zigbee Transceiver RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
AT86RF231-ZU_09 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Low Power 2.4 GHz Transceiver for ZigBee
AT86RF231-ZUR 功能描述:射频收发器 2.4GHz, Zigbee Transceiver RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
AT86RF232-ZX 功能描述:射频收发器 2.4 GHZ ZIGBEE TRANSCEIVER RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
AT86RF232-ZXR 功能描述:射频收发器 2.4 GHZ ZIGBEE TRANSCEIVER RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
AT86RF233-ZF 功能描述:IC RF TXRX+MCU 802.15.4 32-VFQFN 制造商:microchip technology 系列:- 包装:托盘 零件状态:在售 类型:TxRx + MCU 射频系列/标准:802.15.4，通用 ISM > 1GHz 协议:6LoWPAN，Zigbee? 调制:O-QPSK 频率:2.4GHz 数据速率（最大值）:2Mbps 功率 - 输出:4dBm 灵敏度:-101dBm 存储容量:128B SRAM 串行接口:SPI 电压 - 电源:1.8 V ~ 3.6 V 电流 - 接收:11.3mA ~ 11.8mA 电流 - 传输:7.2mA ~ 13.8mA 工作温度:-40°C ~ 125°C 封装/外壳:32-VFQFN 裸露焊盘 标准包装:490
AT86RF233-ZFR 功能描述:IC RF TXRX+MCU 802.15.4 32-VFQFN 制造商:microchip technology 系列:- 包装:剪切带（CT） 零件状态:在售 类型:TxRx + MCU 射频系列/标准:802.15.4，通用 ISM > 1GHz 协议:6LoWPAN，Zigbee? 调制:O-QPSK 频率:2.4GHz 数据速率（最大值）:2Mbps 功率 - 输出:4dBm 灵敏度:-101dBm 存储容量:128B SRAM 串行接口:SPI 电压 - 电源:1.8 V ~ 3.6 V 电流 - 接收:11.3mA ~ 11.8mA 电流 - 传输:7.2mA ~ 13.8mA 工作温度:-40°C ~ 125°C 封装/外壳:32-VFQFN 裸露焊盘 标准包装:1
AT86RF233-ZU 功能描述:射频收发器 2.4GHz ZigBee Transceiver RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray